Advanced Panels

Panel Settings whether panel monitoring runs at all, and which config file it reads - the rest of this app's settings (auth, BMS bridges) are unaffected and live in the environment, not here

Panel monitoring enabled

Panels config file path

Configured Panels Axis EN / Axis AX / MxPro 5 printer ports - listen-only, nothing is ever sent to a panel

Add a Panel

Panel ID

Model

Location

Auto-connect on startup

Printer port

Baud rate

Block end after quiet (s)

Link down alarm after (s)

Zone count (BMS map)

Loop count (BMS map)

Devices per loop (BMS map)

Keep a raw capture of the port (captures/)

The panel's printer port is RS232, 9600 8N1, transmit only. Enable "External" printing for Fires, Alarms, Faults and Tests on the panel (Print - Setup), or in the PC Config Tool's Printer Options, or the panel won't print them.

	Panel	Make / Model	Location	Transport	Address	Status
Loading...

Events from the panels checked above - check/uncheck panels to change what's shown

Time	Panel	Event	Severity	Location	Address
No panels selected